Tear down the Huawei P9 for Screen, Battery, Camera

Tear down the Huawei P9 for Screen, Battery, Camera
Huawei P9 Android smartphone. Announced 2016, April. Features 3G, 5.2″ IPS-NEO LCD capacitive touchscreen, Dual 12 MP camera, Wi-Fi, GPS, Bluetooth.
Tools Needed:
Ejector Tool
Guitar Picks
Tweezers
Spudger Tool
Pentalobe Screwdriver
Phillips Screwdriver
1.-Huawei-P9
Step 1: Power off the Huawei P9 and remove the Huawei P9 card tray.
2.-remove-sim-card-tray
Step 2: Undo the 2 charging port screws
4.-undo-charging-port-screws
First with the phone sucker suction force open a crack from the front panel
Then use pry bar slot in from the side,
Slide up and down;
After the open side of the draw,
Then carefully cut open the top and bottom sides,
separated shell
5.-release-the-lcd-assembly

Step 3: Disconnect the P9 fingerprint sensor flex cable.
7.-disconnect-LCD-assembly
Step 4: Undo the screws locking motherboard and charging port.
8.-undo-motherboard-screws
Disconnect the flex ribbon connectors (disconnect-motherboard-connectors)
10.-disconnect-motherboard-connectors
Step 5: disconnect-loudspeaker-connection.
13.-disconnect-loudspeaker-connection
Step 6: Pry to release the Huawei P9 charging port module, earphone jack and vibrating motor.(release huawei-p9-charging-port)
16.-huawei-p9-charging-port
Step 7: Remove the Huawei P9 battery disconnect-battery-connector
18.-disconnect-battery-connector19.-huawei-p9-battery
Step 8:remove the huawei-motherboard-flex-cable-ribbon.
20.-huawei-motherboard-flex-cable-ribbon
Now the Huawei P9 was disassembled.


From hcqs.us

From the hcqs.us