Post by hexixi on Jan 23, 2016 8:36:19 GMT 1
FUNCTION
Use a Phone Battery Tester and converted Universal Meter (for better demonstration) to
test the resistance, voltage, charging and capacity of the battery.Sampling test and
complete test are applied based on the actual situations.
RESISTANCE &VOLTAGE TEST
Select Static Parameter Settings, check the displayed value.
According to HCQS standard :
Resistance value should be less than 150mΩ.
Voltage value should be greater than 3.7V.
CHARGING TEST
Select Charging Function and set the parameter.
Start charging to see if it can work properly.
CAPACITY TEST
▼ Check the Battery Current Capacity and Energy Capacity on the label.
▼ Then select Battery Capacity Test and set the parameters.
▼ (1). Fully discharge; (2). Recharge; ( 3). Fully discharge again.
▼ Record the Discharge Current Capacity and Discharge Energy Capacity values displayed.
HCQS capacity standard : Deviation ±10%
DROP TEST
Get the battery fully charged and stand for 30 minutes,
drop it down to a 18~22mm plank at the height of
1 meter. Check if the battery is malfunction or has
any damage on the appearance.
FULLY CHARGED CYCLES
Connect with itools and enter into the Battery Master.
Check the fully charged cycles
BATTERY ACTIVATION TIPS
Some customers report that the batteries have no response when charging. For some new lithium battery,
it just need to be activated. Here we have 4 tips. Please choose the one convenient for you.
1. Charge with the matched charger for a period of time.
Remember to plug the data cable first, then install the battery.
2. Use Battery Activation Plate
3. Use Universal Charger
4. Use DC Power Supplier
From :hcqs.cc
Use a Phone Battery Tester and converted Universal Meter (for better demonstration) to
test the resistance, voltage, charging and capacity of the battery.Sampling test and
complete test are applied based on the actual situations.
RESISTANCE &VOLTAGE TEST
Select Static Parameter Settings, check the displayed value.
According to HCQS standard :
Resistance value should be less than 150mΩ.
Voltage value should be greater than 3.7V.
CHARGING TEST
Select Charging Function and set the parameter.
Start charging to see if it can work properly.
CAPACITY TEST
▼ Check the Battery Current Capacity and Energy Capacity on the label.
▼ Then select Battery Capacity Test and set the parameters.
▼ (1). Fully discharge; (2). Recharge; ( 3). Fully discharge again.
▼ Record the Discharge Current Capacity and Discharge Energy Capacity values displayed.
HCQS capacity standard : Deviation ±10%
DROP TEST
Get the battery fully charged and stand for 30 minutes,
drop it down to a 18~22mm plank at the height of
1 meter. Check if the battery is malfunction or has
any damage on the appearance.
FULLY CHARGED CYCLES
Connect with itools and enter into the Battery Master.
Check the fully charged cycles
BATTERY ACTIVATION TIPS
Some customers report that the batteries have no response when charging. For some new lithium battery,
it just need to be activated. Here we have 4 tips. Please choose the one convenient for you.
1. Charge with the matched charger for a period of time.
Remember to plug the data cable first, then install the battery.
2. Use Battery Activation Plate
3. Use Universal Charger
4. Use DC Power Supplier
From :hcqs.cc