Post by hexixi on Mar 7, 2016 10:58:49 GMT 1
HCQS Guide for the iPhone 6s LCD Renovation.
1.Cracked Screen Test
Test the function of cracked screen.
2.Bezel Disassembling
After heating, cut the four corners of the
bezel and slightly disassemble it.
3.LCD Separating
Cover the glass with tape, put the screen on the mat
and separate it with gold cutting wire.
4.Glue/POL Removing
Slightly bend the flex and put the LCD against the bottom of the
panel. Lower the handle and let the blade go against POL film
properly, then push the panel. Remove residual POL manually.
5.POL Laminating
Align the POL Film and LCD then finish POL lamination
6.Back Light Replacing
After cleaning and heating, disassemble the back
light unit layer by layer. Install the new back light
and solder it to the flex.
7.OCA Laminating
Align the OCA Film and LCD then finish OCA lamination.
8.Glass Laminating
Align LCD and Glass with mold. Put it on the Glass
Laminating Machine and press it.
9.Bubble Removing
Put the screen into the Bubble Removing Machine and
make sure it is 100% locked. Set the parameter and
start the process.
10.Testing
3D touch, touch function, back light test
From :http://www.hcqs.cc/
1.Cracked Screen Test
Test the function of cracked screen.
2.Bezel Disassembling
After heating, cut the four corners of the
bezel and slightly disassemble it.
3.LCD Separating
Cover the glass with tape, put the screen on the mat
and separate it with gold cutting wire.
4.Glue/POL Removing
Slightly bend the flex and put the LCD against the bottom of the
panel. Lower the handle and let the blade go against POL film
properly, then push the panel. Remove residual POL manually.
5.POL Laminating
Align the POL Film and LCD then finish POL lamination
6.Back Light Replacing
After cleaning and heating, disassemble the back
light unit layer by layer. Install the new back light
and solder it to the flex.
7.OCA Laminating
Align the OCA Film and LCD then finish OCA lamination.
8.Glass Laminating
Align LCD and Glass with mold. Put it on the Glass
Laminating Machine and press it.
9.Bubble Removing
Put the screen into the Bubble Removing Machine and
make sure it is 100% locked. Set the parameter and
start the process.
10.Testing
3D touch, touch function, back light test
From :http://www.hcqs.cc/